RTV Silicones >> One Part, Clear, RTV Silicone Adhesive Sealant



Jump to Product Number
	3M

	Accessories

	Adhesives

	Brushes

	Electronic Cleaners

	Contact Cleaners

	Desoldering Braid

	Dusters & Circuit Coolers

	Electroless and Electroplating

	EMI / RFI Shielding

	Epoxies

	Flux and Flux Remover

	Isopropyl Alcohol

	Lead Free Solder

	Leaded Solder

	Lubricants

	Pens

	Potting & Encapsulating

	Protective Coatings

	Prototyping Materials

	RTV Silicones

	Screen Cleaners

	Soldering/desoldering

	SpecialtyCleaners

	Specialty Productss

	Swabs

	Thermal Management

	Thermally Conductive Adhesives

	Wipes

RTV Silicones by

1-Part Adhesive Sealant 1035

Quick Links

MSDS

Specifications

Spec Sheet

Available Sizes

Related products:
	5818 Translucent



	Selection Guide One Part Chart Two Part Chart


	General Purpose Aerospace Marine High Performance Assembly Electronics Thermal Conductivity High Temperature Low Temperature

Primary Characteristics

Translucent Paste

Excellent chemical resistance

Non-corrosive

High strength

Marine application

Modified alkoxy (neutral) cure

Primerless adhesion

UL HB Recognition

UL File No. E36952

Use for:
Assembly applications requiring high productivity

A spreadable, non-corrosive, translucent paste. Excellent for the sealing and bonding of electronic components onto printed circuit boards and protecting copper connections on electronic parts assemblies. Excellent as a weather proofing sealant where power cords enter motors. Use as a gasket for leak resistant sealing and insulating.

Retains elastomeric properties for long periods at temperatures from -60°C to 204°C (-75°F to 399 °F). Recommended for marine applications.

Available Sizes

Catalog Number	Sizes Available	Description	Case Qty
1035-85ML	85 mL (3 oz)	Tube	6

Specifications

Use	Adhesive Sealant
	Marine Application
Special Features	High strength, non-corrosive
Cross Reference	RTV 5818, RTV5812, RTV5813
Uncured Properties
Consistency	Paste
Color	Translucent
Specific Gravity	1.04
Tack Free Time	15 min
Cure Through Time	12 - 24 hours
Useful Temp. Range	-60°C to 204°C (-75°F to 399 °F)
Cured Properties - MECHANICAL
Hardness	21 (Shore A)
Tensile Strength	1.896 MPa (275 psi)
Elongation	500%
Tear Strength	7.1 kg/cm (40 lb/in)
Peel Strength	8 kg/cm (47 lb/in)
Cured Properties - ELECTRICAL
Volume Resistivity	2 x 10¹⁵ ohm · cm
Dielectric Strength	16.8 kV/mm
	425 V/mil
Dielectric Constant	2.8 @ 100 Hz
Cured Properties - THERMAL
Thermal Conductivity	0.06 W/m · °K
Brittle Point	-60°C (-75°F)
Thermal Expansion	3.0 x 10^-4 mm/mm/°C
Other
Viscosity (@ 25°C)	480 g/min

Return to top

web site design by offbeat studio