thermal management
  1 Part Thermally Conductive RTV Silicone
  2 Part Thermally Conductive RTV Silicone
  Carbon Conductive Grease
  Non-Silicone Heat Transfer
  Projection Tube Coolant
  Silicone Heat Transfer
  Silver Conductive Epoxy
  Super Thermal Grease
 

Thermally Conductive Epoxy

MG Chemicals All Products
Jump to Product Number

  3M Engineered Fluids
  3M Electronic Liquids
  Accessories
  Adhesives
  Brushes
  Contact Cleaners
  Desoldering Braid
  Dusters & Circuit Coolers
  Electroless and Electroplating
  Electronic Cleaners
  EMI / RFI Shielding
  Epoxies
  Flux and Flux Remover
  Greases & Lubricants
  Isopropyl Alcohol
  Lead Free Solder
  Leaded Solder
  Pens
  Potting & Encapsulating
  Protective Coatings
  Prototyping Materials
  RTV Silicones
  Screen Cleaners
  Soldering/desoldering
  SpecialtyCleaners
  Specialty Products
  Swabs
  Thermal Management
  Thermally Conductive Adhesives
  Wipes

 

RoHS Compliant Super Thermal Grease
8615

Designed for use with heat sinks to effectively dissipate heat generated by electronic devices and circuitry.  Ideally used to cool CPUs (over clocking), chipset and graphics cards. 

Formulated with Boron Nitride, this grease gives super high thermal conductivity without the capacitance issue associated with silver filled greases.

  • Thermal conductivity of 3.0 w/(m·k)
  • Contains no silicone or other metal particles
  • Pigmented with Boron Nitride particles
  • Maximum operating temperature of 150 °C / 302 °F

It is important to properly cool your system for maximum reliability and to prevent premature failure. 

Heat sinks alone are not effective enough to properly cool your system do to the imperfections on the surface of your circuitry and the heat sink. See flash demonstration.

The use of our Super Thermal Grease in assisting the heat sink will provide you with superior heat dissipating ability. 

 

Specifications

Physical Properties
Phase   Paste
Odor   Odorless
Color   White
Base   Paraffin oil
Specific Gravity   1.2
Flash point   165 °C
Autoignition temp.   > 315 °C
Solubility in water   Insoluble
Vapor Density   > 5 (Air =1)
VOC   0
Corrosiveness   Non-corrosive
Thermal Properties
Thermal Conductivity
temperature in  °C in W/m·K
(BTU in /(hr ft2  F) )
(ASTM D 5470) 50 2.97
  100 2.98
  150 3.00 (20.8)
Thermal Limits Peak -40 °C to +150 °C
  Long Term -15 °C to +125 °C
Electrical Properties
Dielectric Strength
(tested at 1 MHz @ ambient condition)
ASTM D150 170 Volts/mil
Dielectric Constant, K
(tested at 1 MHz)
ASTM D150 4.2
Dissipation Factor, D
(tested at 1 MHz)
ASTM D150 0.001
Volume Resistivity
(tested at ambient condition)
ASTM D257 1.2 x 1012 Ohms·cm

Available Sizes

Catalog NumberSizes AvailableDescription
8615 3.5 gram (0.12 oz) Syringe